Bench PRC 9.6 User Manual download pdf (Page 7)

M O R E T H A N 5 0 Y E A R S O F I N D U S T R Y L E A D E R S H I P

S O L U T I O N S F O R T H E E L E C T R O N I C S I N T E R C O N N E C T I O N P R O C E S S

12 13

MBT 301

SIMPLE AND EASY TO USE FOR REWORK TECHNICIANS OR OPERATORS ON THE LINE

MBT 350

ADVANCED TECHNOLOGY AND PROGRAMMABILITY

The MBT 301 is a multi-technology system with

two, individually controlled, universal handpiece

channels. The system features a two-line back lit

LCD display. The programmable features include:

password protection from unauthorized changes,

a user definable temperature operating range, and

"SetBack" & "Auto-Off" functions to preserve tip life.

To protect your more expensive tip-heater cartridge

and fine point soldering tips from oxidation, the

TD-100 can be used with the optional "Instant-

SetBack Cubby". The cubby puts the iron's channel

into setback if it is idle in the cubby for more than

45 seconds! One Instant SetBack Cubby can be

connected to the MBT 301.

To maximize tip life and reduce operating costs, PACE's well recognized “SetBack” and “Auto-Off” features are included. The system

will automatically reduce the set temperature by 50% then turn off after a user defined period of inactivity, from 1 to 90 minutes. To

really protect your more expensive tip-heater cartridge and fine point soldering tips from oxidation, the TD-100 can be used with the

new “Instant-SetBack Cubby”. The cubby puts the iron's channel into setback if it’s in the cubby for more than 45 seconds! Up to

two Instant SetBack cubbies can be connected to the MBT 350.

The new dual purpose vacuum/pressure pump and delivery system featuring PACE's patented SNAP-VAC Technology, provides the

most vacuum available for desoldering applications. When used with an air pencil, the high resolution, pressure control valve allows

for precise adjustment when working on the smallest components such as 0201's.

The new backlit, digital, LCD screen displays the temperature of all three handpiece channels or, with scan mode activated, will cycle

through the handpiece channels one at a time displaying set and actual temperatures. The backlight and character contrast on the

display can be adjusted to meet individual preferences. And finally, the system can be programmed with the name of the operator

or company which is displayed when the system is turned on.

1. TD-100 THERMO-DRIVE IRON

2. MT-100 MINITWEEZ

3. PS-90 UNIVERSAL IRON

4. TT-65 THERMOTWEEZ

5. TJ-85 THERMOJET

6. SX-90 SODR-X-TRACTOR

7. TP-100 THERMOPIK

The new dual purpose vacuum/pressure pump and delivery system featuring PACE's patented SNAP-VAC Technology, provides the

most vacuum available for desoldering applications. When used with an air pencil, the high resolution, pressure control valve allows

for precise adjustment when working on the smallest components such as 0201's.

MBT 300 SERIES SPECIFICATIONS

SPECIFICATIONS MBT 301 MBT 350 MBT 301 E MBT 350 E

Kit with Handpieces Part Numbers:

Power Source Only Part Numbers:

8007-0478

(TD-100 & SX-90)

8007-0480

8007-0454

(TD-100, MT-100 &

SX-90)

8007-0452

8007-0479

(TD-100 & SX-90)

8007-0481

8007-0455

(TD-100, MT-100 &

SX-90)

8007-0453

Power Requirements 120 VAC, 60 Hz (240 watts maximum) 230 VAC, 50 Hz (240 watts maximum)

Handpiece Technology Compatibilty IntelliHeat Handpieces with Tip Heater Cartridge or SensaTemp Technology

Dimensions 135mm H x 165mm W x 260mm D (5.3” x 6.5” x 9.25”)

Weight 5 Kgs (11 lbs.)

Tip to ground resistance < 2 Ohms

Temperature Stabililty ± 1.1

C (2

Temperature Accuracy Meets or exceeds ANSI J Std 001

Set Temp Range

37-482

C (100-900

F) SensaTemp

205-454

C (400-850

F) tip Heater Cartridge

Vacuum Rise Time 150 ms Average as measured with PACE Process Monitor

Vacuum 20 in Hg max

Pressure 18 p.s.i. max

Air Flow 8 SLPM max

The MBT 350 is loaded with features to improve

quality, increase through-put, extend tip life, and

protect your process. The system is fully programmable

and can be password protected from unauthorized

changes. In some cases technicians become frustrated

with being locked into a single temperature. The MBT

350 provides the solution! An approved operating

range can be programmed allowing operators the

flexibility to do their work, while eliminating the risks

associated with giving techs access to the entire

temperature range of the system. Operators can be

given a range of 5 to 450˚F (3-250˚C) to operate

within! When high-mass tips are required, an offset

can be programmed for each of the three channels,

individually.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

Bench PRC 9.6 User Manual Page 7

Comments to this Manuals